YPJ-iii capsule polishing machine

The following is a detailed description of the polishing principle:   First, the capsule is placed into the working area of the BA-YPJ automatic capsule polishing machine, which is usually achieved by means of a capsule chute or conveyor belt. Once the capsule is in place, the capsule polisher starts working.   Inside the polisher are brushes and a polishing barrel, and the brushes begin to move in a rotating motion. This rotational motion drives the capsule in a circular spiral motion along the walls of the polishing barrel. During this process, the capsule moves in the direction of the coil spring.   At the same time, there is constant friction between the capsule and the rotating brush and the wall of the polishing barrel. This friction is the key to the polishing process as it effectively removes defects such as dust, dirt, stains and scratches from the surface of the capsule shell. The fine bumps on the wall of the polishing cylinder enhance the friction and make the polishing effect more significant.   After a period of friction polishing, the surface of the capsule becomes smooth and clean. After finishing polishing, the capsules will be discharged from the discharge port of the YPJ-iii capsule polishing machine into the waste hopper or collection device.   It should be noted that a small amount of drug powder or fine debris may be brushed off during the polishing process. To avoid environmental contamination and to keep the equipment clean, BA-YPJ tablet polishing machine are usually equipped with a sealed cartridge and a vacuum cleaner. Small holes in the wall of the polishing canister allow these fragments to enter the sealing canister, which is subsequently sucked up and recycled by the vacuum cleaner.   In summary, the polishing principle of the YPJ capsule polisher and sorters is to achieve the purpose of removing defects on the surface of the capsule and improving the finish by means of the rotary movement of the brush and the circular spiral movement of the capsule in the polishing cylinder, combined with the friction with the wall of the polishing cylinder and the brush. This capsule polisher machine BA-YPJ-III principle is simple and effective, suitable for pharmaceutical, health products and food and other industries in the capsule appearance of higher requirements of the product.